Erby Posted November 16, 2014 Report Share Posted November 16, 2014 7500 square foot building with soffit vents around the exterior and one large cupola in the center of the roof with vents on the side of the cupola. I'm thinking ridge vents would be a better solution. Your thoughts? Overview 64.38 KB Cupola 42.69 KB Attic opening into cupola 43.5 KB Link to comment Share on other sites More sharing options...
kurt Posted November 16, 2014 Report Share Posted November 16, 2014 Ridge vents would be "better", but it might work just fine as it sits. A lot depends on other moisture management considerations elsewhere in the building. Link to comment Share on other sites More sharing options...
Jim Katen Posted November 16, 2014 Report Share Posted November 16, 2014 How old is it? Is it a dwelling or what? How has the existing venting worked so far? Link to comment Share on other sites More sharing options...
Marc Posted November 16, 2014 Report Share Posted November 16, 2014 I think that because the openings in the cupola are slightly higher than the ridge, a ridge vent would not make an improvement. Think of the effect of flue height in regard to draft. Marc Link to comment Share on other sites More sharing options...
Chad Fabry Posted November 16, 2014 Report Share Posted November 16, 2014 The cupola is a ridge vent. Link to comment Share on other sites More sharing options...
Erby Posted November 16, 2014 Author Report Share Posted November 16, 2014 Commercial office building with six bathrooms and one kitchen as moisture sources. I guess it seems to be working okay. It's location within a complex has some architectural requirements for matching other buildings. They're all done the same way. Click to Enlarge 73.04 KB Link to comment Share on other sites More sharing options...
mjr6550 Posted November 16, 2014 Report Share Posted November 16, 2014 If it aint broke don't fix it. Link to comment Share on other sites More sharing options...
Mike Lamb Posted November 17, 2014 Report Share Posted November 17, 2014 If it aint broke don't fix it. For sure. Especially attic/roof ventilation which can confound. If a system has been in place 10+ yrs and looks nice and dry, but does not meet code or make sense by general building science understanding. So what? Leave it alone. Link to comment Share on other sites More sharing options...
Jim Katen Posted November 17, 2014 Report Share Posted November 17, 2014 Commercial office building with six bathrooms and one kitchen as moisture sources. I guess it seems to be working okay. It's location within a complex has some architectural requirements for matching other buildings. They're all done the same way. There'll be no significant cooking or bathing and no laundering. Really no moisture to speak of. In the picture, it looks like the cupola spans a rated wall in the attic. If so, there might be a concern about fire. Link to comment Share on other sites More sharing options...
Jim Baird Posted November 17, 2014 Report Share Posted November 17, 2014 I think it looks great. If there is a problem with heat building up a thermostat power assist might help at that opening up...commercial bldg attic that big should have one hour separations with fire-dampered louvers to break space into <3000 SF areas. Link to comment Share on other sites More sharing options...
Erby Posted November 18, 2014 Author Report Share Posted November 18, 2014 Where do you get the < 3000 SF Area from, Jim Baird. Link to comment Share on other sites More sharing options...
Erby Posted November 18, 2014 Author Report Share Posted November 18, 2014 Never mind, Jim. I found it. However IBC 708.4 (3) applies as there is a sprinkler system installed throughout the attic. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now