Jim Baird

Wonder why anybody would stack a flue liner like this on top of the one lining the brick column. There was no code need for height here. There appeared to be some mortar but I would not lean a ladder against this thing.

Do you think we are being visited by replicants, Marc? As a Philip K Dick fan, I would not be surprised if we start seeing inspectorbots.

I have been called off a number of times, once when I discovered violations of disclosure where seller tried to hide things. Once I arrived at a job, called the client and told him I would not even start the job, and did not charge him at all.

I always offer the option to call me off, and let me bill by the hour. I don't push it but I do offer it. I too like to finish a job.

Surface equipment, if listed, is fine. Maybe you are thinking of the fact that Romex is not listed except by exception by local AHJ, for commercial use. In my day as an AHJ banks (of which an awful lot were built around here during those crazy Y2K days), always wanted to put on a real homey feel in their design, (maybe instead of the cold steel industrial hidden face of their operation). They used wood frame walls and cushy comfortable conference rooms and offices, with judges' paneling and tray ceilings, and they always wanted a break from commercial wiring conduit rules. The other thing they always wanted a break from was the code requirement for a drinking fountain outside of the required restrooms. They always said they would provide contracted drinking water stations, which they usually did.

During the remodel the headwall stayed the same but the drain got relocated probably due to structural issues from a long time leak etc. The guy doing the job was not going to be living with it.

I see a greasy TV in the future.

...noteworthy but NBD. Must have been green at installation. You don't get them this big at big box or local lumber supply. I bet it made a hump in the finish surface.

I like the little cheap ones because of they fit in my pockets so well. That scalloped rim on many models is supposed to be designed to break out a car windshield from the inside, in the event you are trapped in there.

One of electricity's mysterious aspects is that you cannot see it at work. You can only test remotely, by measure, it performance. Sometimes when performance teeters off the stage it can only be traced by signs it left behind. This panel was installed ca. 2008 by licensed personnel. Why the shadows of arcs and the partially melted hot connection in the pic? Jim Baird

Yet another topic where, despite my 20+ yrs experience, I find myself a beginner. We don't get many HUD FHA foreclosures around here. The subject property was the only one listed for my county. I took the bait as it is in my town of current (30 yrs) residence. Subject property was foreclosed under FHA rules, bank completely off the hook. No utilities allowed to be connected. Property offered "as is". Buyer big time beware. HUD sends a crew from two states away to "inspect", although they will not activate any utilities. The crew energized the electric system with a generator, and said they operated two HVAC systems and found them operational. I, working for a buyer not yet under contract, found this at disconnect of a condenser. I have never seen a disconnect jerried to not switch off. Maybe it kept tripping and they stuck this screw in there to keep it on. Owners who walked from the house took the water heater with them, but left behind a fairly late model car with good tires with a license plate expired in Oct '17. Do the brethren here do many of these half vast inspects?

Yet another topic where, despite my 20+ yrs experience, I find myself a beginner. We don't get many HUD FHA foreclosures around here. The subject property was the only one listed for my county. I took the bait as it is in my town of current (30 yrs) residence. Subject property was foreclosed under FHA rules, bank completely off the hook. No utilities allowed to be connected. Property offered "as is". Buyer big time beware. HUD sends a crew from two states away to "inspect", although they will not activate any utilities. The crew energized the electric system with a generator, and said they operated two HVAC systems and found them operational. I, working for a buyer not yet under contract, found this at disconnect of a condenser. I have never seen a disconnect jerried to not switch off. Maybe it kept tripping and they stuck this screw in there to keep it on. Owners who walked from the house took the water heater with them, but left behind a fairly late model car with good tires with a license plate expired in Oct '17. Do the brethren here do many of these half vast inspects?

Realtors around here want an inspector to be a tail wagging, puppy dog enthusiast who is a booster for a deal. I tend to be a skeptic and see myself as the buyer advocate. When I find problems I raise hell about them and encourage the buyer to lower their offer. Other than former customers my referrals come from closing attorneys that know my work.

...a carpenter friend bought a hundred + year old home 40 yrs ago. Pine floor frame had sagged away from a central, double flue, rock and brick chimney column. He tried to straighten things with big jacks, but when he lifted, everything lifted together, so he ended up re-framing floors in pieces. With a lot of patience he finally got it right and still lives in a beautiful home. Warning: this kind of project will never be featured on "Flip this house" programs.

All you can do is stop that journey to the center of the earth. Treated posts on 4" cap block located best you can might be best you can do. All that deflection is there to stay.

Love the chain/faux narrative here...on this house blackberries ain't much in the mix. It is mostly privet, poke salad, elm, and sweet gum mixed with hackberry. A really dense mix.

I have walked from jobs too, but in this case the buyer met me and led me where he could, after our phone conversation and his agreement to pay me per hr.

I inspected a 120 yr old house the other day that was unoccupied for at least the last 20 yrs. The lot had gone untended for so long I described it as having returned to a "wooded" state. I called for an exterminator to follow me up because of evidence I found of termites. I saw no wiggling insects, but I noted that they were unlikely to get a termite inspector until the lot was cleared. I think the buyer remains undeterred. Anyone here done a house on a lot returned to feral state? No pics as the lot was so densely wooded you could not really see the building, plus I broke the screen on my point and shoot while crawling under.

How about for floor framing? I have a distant cousin who bought a house built in 1917 by a rich guy south of here. He framed the whole thing from California redwood. No telling what it cost him but the house is still standing straight. Around here SYP or floor trusses are needed for any kind of span, and SYP has been degraded by the standards institutes and the codebooks because the "super trees" being raised now by the wood production experts are so pithy they fail the engineering tests applied by the raters. Someone earlier mentioned bounce. As an AHJ I inspected a modular with floor trusses that passed muster far as I could tell. The owners had moved in a bunch of stuff too early, and when I walked across the dining room the dishes in the floor standing china cabinet all rattled.

When I was an AHJ I would make a visit whenever a caller had a safety issue. All the visits I made about possible mold were for tenants that also happened to be behind on rent. Some were downright comical with their feigned coughing.

Heck no Marc. SYP is rated way higher than all those whites, which are lumped together under the SPF category which stands for spruce pine fir.

It likely fell short of compliance with the 1900 building code;-)

These rafters barely qualified as 2x4. The steepness allowed them to get away with scabs. Down in the crawl these guys notched away more than half of joist height to rest on ledgers. It is something I see a lot of, but only rarely have I seen joist split as a result of over notching.

House framed in 1900. Looks like they sawed the pine right next door. Lots of slab pieces in the skip sheathing and lots of scabs to make length.

My search for the main water supply cutoff found this fitting that looks like a pressure control where the supply enters the building. It is corroded, with a very slow drip leak. The bend in the copper looks like this assembly was forced in place, with what looks like a galvanized to copper mismatch.