Jump to content

plummen

Members
 View Profile  See their activity

  • Posts

    545

  • Joined

  • Last visited

 Content Type 

Everything posted by plummen

  1. plummen
    Picture?
  2. plummen

    R-458A

    plummen replied to Jim Katen's topic in HVAC Forum

    Theres been rumors around hvac supply houses for some time now about 410a equipt being phased out in near future. I'd say it has more to do with patents running out than it is out performance of any particular product. MO 99 seems to have been a popular go to around here for a while,especially since we cant get straight r22 from local supply houses anymore.
  3. plummen
    Have you checked the batteries and thermostat?
  4. plummen
    Yes that is a bonding bushing,should of been bare copper or some other color besides black though,they should've done a better job of marking that neutral also.
  5. plummen
    Why is a dryer connected to a 50a recept to begin with? Was the inspection sticker actually for the dryer hookup,or was it hacked together after the inspection was done?
  6. plummen
    High humidity?
  7. plummen
    Normally we're required to increase the size of the copper if more than 1 90 is used.
  8. plummen
    That's a lot of stuff.
  9. plummen
    Depends on your local codes
  10. plummen
    If youre going to all that trouble Id go to your favorite box store and pick up a single handle anti scald faucet(moen being my prefered brand) and install it.
  11. plummen
    Around here thats considered "funneling",A big no go. Anyway I would have installed the cleanout in the 4" instead of the wye.
  12. plummen
    Floor registers are designed to be regulated,If the buyer thinks theyre too restrictive or not restrictive enough they can always change them later.
  13. plummen
    If you pull the plastic cap off the threads I think its some kind of expanding plastic plumbing plug.
  14. plummen
    I was called out to a job south of omaha many years ago where somebody removed the drip leg from a leaking pop off valve and installed a pipe plug in its place. It went through a wall pushing a giant stand up type piano through a bed room wall,Pieces of the piano were stuck in the wall above the head board. Fortunately it happened during the day when nobody was home. Property management company that had their maintenance guy work on the water heater went belly up a couple years later.
  15. plummen
  16. plummen
    To say that I hate scaffolding period is a major understatement,But that clown needs a visit from those guys in "Osha Wisconsin" to say the least.[:-taped]
  17. plummen
    We blew one up back when I was still teaching many years ago,Cleared the trees in the field straight up around 25' or so.
  18. plummen
    Size Dimension Ratio,its normally sdr26 or sdr35. Basically its either 26 or 35 times the wall thickness of the pipe,We are only allowed to use it for sewer lines outside of a structure around here anyway.
  19. plummen
    So,is that a piece of sdr sewer pipe being used for a stack under the pvc or is it just a piece of really green dwv copper?[:-bigeyes
  20. plummen
    What he said.
  21. plummen

    Lennox Age

    plummen replied to Mike Lamb's topic in HVAC Forum

    89-90
  22. plummen
    Picture?
  23. plummen
    they could have atleast used to fire stop foam! hahaha What a hack.
  24. plummen
    I agree with that. Id look at the furnace and follow the pipe feeding it combustion air to see where it goes now.
  25. plummen
    Picture?
×
×
  • Create New...